GFRG New Construction – Low Cost

Glass fiber reinforced gypsum(GFRG) wall panel is made essentially of gypsum plaster reinforced
with glass fibers which when filled with reinforced concrete in an appropriate proportion becomes strong enough to act as a load-bearing and shear wall. The panels are hollow and can be used as load-bearing walls. The hollow cores inside the walls can be filled within-situplain or reinforced
concrete.Glass fiber reinforced gypsum (GFRG) panel or Rapid wall is a modern building element
for mass-scale construction of houses in a very short span of time.
GFRG panels can even resist the lateral loads due to earthquakes and wind. Not only the walls, but the roofs, floors, sunshades and the boundary walls can be also made using GFRG panels. Looking at
its success and innumerable advantages, the technology spread like wildfire and is being adopted
heavily throughout the construction industry.
Applications of GFRG Panels

  1. As a light-weight bearing wall
  2. As high-capacity vertical and shear load-bearing wall
  3. As partition wall
  4. As roof slabs/horizontal floor
  5. As compound wall/Security wall
  6. As pitched roofing
  7. As cladding in industrial structures
    Limitations of GFRG Panels
  8. The panels are required to be handled with extreme care and specific machinery is
    needed for their movements.
  9. The panels cannot be used for wall with circular or higher curvature.
  10. The panels need to be neatly stacked in order to avoid abrasion.
  11. The clear span is limited to 5m for residential buildings.
     What are the other benefits of GFRG panels?
    GFRG panels are environment-friendly, make construction faster, materials like sand and cement are required in less quantity. Gives more carpet area, long-lasting, fireproof soundproof, it reduces the overall cost by at least 20% and keeps room temperature cooler than that of conventional buildings.
     How much does a single GFRG panel cost?
    Single GFRG panel cost around rupees thousand with GST it will cost around rs1120 per
    square meter.

For M Sand Suppliers & Ready-mix Concrete Contact Tavara Mines & Minerals.

Tavara Mines and Minerals renowned name in manufactured sand in Bangalore for plastering, blockwork concrete, and 100% water washed m sand in Bangalore

Ready-mix concrete and Its Advantages

Ready-mix concrete is concrete that is manufactured in a batch plant, according to a set engineered mix design. Batch plants combine a precise amount of gravel, sand, water, and cement together by weight, allowing specialty concrete mixtures to be developed and implemented on construction sites.

Ready-mix concrete is often used over other materials due to the cost and wide range of uses in building, particularly in large projects like high rise buildings and bridges. It has a long life span when compared to other products of similar use, like roadways. It has an average life span of 30 years under high traffic areas compared to the 10 to 12-year life of asphalt concrete with the same traffic.

Ready-mix concrete, or RMC as it’s also known, refers to concrete that is specifically batched or manufactured for customers’ construction projects and supplied to the customer on-site as a single product. It is a mixture of Portland or other cement, water and aggregates: sand, gravel, or crushed stone. All aggregates should be of a washed type material with limited amounts of fines or dirt and clay.

Advantages and disadvantages of ready-mix concrete

  • Materials are combined in a batch plant, and the hydration process begins at the moment water meets the cement, so the travel time from the plant to the site, and the time before the concrete is placed on-site, is critical over longer distances. Some sites are just too far away; however, the use of admixtures, retarders and cements like pulverised fly ash or ground granulated blast furnace slag (GGBS) can be used to slow the hydration process, allowing for longer transit and waiting time.
  • Concrete is formable and pourable, but a steady supply is needed for large forms. If there is a supply interruption, and the concrete cannot be poured all at once, a cold joint may appear in the finished form.
  • Cracking and shrinkage. Concrete shrinks as it cures. It can shrink ​116 inch (1.59mm) over a 10-foot-long area (3.05 meters). This causes stress internally on the concrete and must be accounted for by the engineers and finishers placing the concrete, and may require the use of steel reinforcement or pre-stressed concrete elements where this is critical.

Visit Us @ Tavara Mines and Minerals

Contact Us @ 7676357635 / 7026800011

M Sand Manufacturers in Bangalore

M Sand is being used widely throughout Bangalore for the constructions. The reason people started using M Sand is due to the increased price and demand of natural sand. In is post we are going to see all about M Sand Manufacturers and its usage and price in Bangalore.

Table of Content

  1. How M Sand Manufactured in Bangalore.
  2. Why use M Sand for constructions.
  3. How to find the best quality of M Sand.
  4. M Sand Price in Bangalore.

How M Sand Manufactured in Bangalore

By crushing the hard and black granite in plant and washing this crushed granite rock several times in a plant a high-quality m sand is manufactured.

The Crushed sand should be in the cubical share than this sand are washed to remove organic materials and unwanted substance and grandad as construction materials. The size of m sand is less than 4.75nm.

In Bangalore Tavara Mines and Minerals is one of the best manufactures of m sand in Bangalore.

To know more about the manufacturing of m sand 

Why use M Sand for constructions.

The demand for natural sand in the market is very high because the government has banned the digging of natural sands from the river bend.

M Sand Vs River Sand
M Sand Vs River Sand

Due to the demand in the market, the price of natural sand is very high compared to m-sand. Natural sand is 4 times costly than m sand.

Advantages of M Sand

  • Cost Efficiency
  • Eco-Friendly
  • Stronger than river sand when it is manufactured properly
  • It’s free of Organic Impurities
  • Workability of concrete
  • Lesser construction defects

How to find the best quality of M Sand.

All the M Sands are not good quality m sands. It should be manufactured properly crushed and washed in a plant.

Some people in Bangalore sell Crushed rock fines as an M Sand but Crushed rock fines look similar to m sand but it is not m sand. It is not good for Construction

M Sand Site Testing
M Sand Site Testing

If the M Sand is not washed properly in the plant, the impurities will not be removed properly which is bad for construction. Always buy an M Sand form a verified Plant which is ISO Certified. Here are Tips to check the quality of M Sand.

M Sand Price in Bangalore

The average Concrete M Sand price in Bangalore can vary between Rs. 635 – Rs. 1140/ Tons Including the Trasport charges. The Price May Differ Depending upon the Area and Distance. To Know the M Sand Exact price Click Here .

All you have to know about Ready Mix Concrete

  • RMC is ready to use the material for concrete which is a mixture of cement, sand, aggregates, and water.
  • The idea of RMC was first introduced in the year 1903 by an Architect Jurgen Heinrich Magens from Germany.
  • In 1907 they discovered that RMC available time can be prolonged by cooling and vibrating it during the transportation.
  • In INDIA RMC was used in 1950 in the construction of Dams like Bhakra Nangal and koyna.

Objective :

  • High-quality concrete is produced.
  • Elimination of storage space for materials like cement, Sand, and aggregate.
  • Eliminate the hiring of plant and labors for making concrete.
  • Wastage of basic material is avoided.
  • The time required is greatly reduced.
  • Noise and Dust pollution is reduced at the site.

Materials Required for Manufacturing RMC:

  1. Aggregate is an important material in the manufacture of concrete. This gives the body to the concrete mixture 70 – 80 % of the concrete.

Based on the size the aggregate is divided into two categories.

  • Coarse aggregate. (Size more than 4.75mm are coarse aggregate)
  • Fine aggregate. (Size less than 4.75mm are fine aggregate)
  • Cement is a binder material which setsand hardens independently and binds other material together.
  • Sand some amount of sand and Water is also added to the mixture and concrete is produced.

Mixing Process:

  1. Transit Mixed or Truck mixed concrete.
  2. Shrink Mixed concrete.
  3. Central-mixed concrete.

Transit Mix or Truck Mixed

  • In this, all the materials along with water are added in the tuck mixture.
  • While traveling to the job site the drum rotates slowly and while arriving at the job site the concrete is completely mixed and ready to use.
  • Concrete mixed in the yard the drum is turned at high speed at 12 – 50 RPM for 50 Revolution. The concrete is slowly aggregated while traveling to the job site.
  • Concrete mixed in transmit the drum is turned at medium speed or above 8 rpm for 70 revolutions while driving to the job site.

Time in Transport:

  • In general, the Truck should deliver the concrete in two hours of time.
  • However, this period can be prolonged by using admixtures or in the cool.

Sampling and Testing for Ready-mix Concrete:

  • As per IS 4926 – 2003 the point and time of sampling shall be at the distance from the discharge from the producers delivery vehicle or from the mixture to the site.

In Bangalore Tavara Mines and Mineral are manufacturing and supplying high-quality M Sand and RMC.

Site Test for M Sand

Sand is a basic raw material used in the construction industries. It is fine aggregate having the particle size between 150 microns and 4.75 mm. Silt content is a super fine material which is less than 150 microns / 0.15 mm in Size. The slit content should not be more than 6% of the total volume of the sand.

Tests for finding quality of sand on site

Excessive clay / Silt

Presence of clay in Sand makes the sand cohesive, the good quality of sand should have less percentage of clay in it.

Presence of excessive clay can be determined in two ways

  1. For the testing, the presence of clay in the sand, take a glassful of water and add some sand to it. Shake it vigorously and allow the sand to settle. Check whether an apparent layer is formed on the sand. Good quality of sand should have less than 8% of clay in it.
  2. Hold some dry sand and drop it. If the Sand adheres to your palm, then it has Clay.

Presence of Organic Impurities in Sand

For detecting the presence of Organic impurities in fine aggregate. Take a Sample of sand and add it in Sodium Hydroxide [NaOH] Solution, Stir the solution for few minutes, if the color of solution changes to brown, then the sand has organic impurities which are not suitable for construction. Good quality of sand shows a lighter color when it is mixed with NaOH solution.

Presence of Excessive moisture content / Bulking of Sand

Presence of excessive moisture content in sand causes increases in the volume of sand. Fine Aggregate Which contains more than 5% of moisture content in its volume is not suitable for construction purposes. For accurate conclusions, fineness modulus test and salt content by weight are suggested for large projects.

Tavara Mines and Minerals rednosed name for M Sand Manufacturer in Bangalore. Check M Sand Test Report for Tavara here – Tavara Test Report

Tagged :

Quarry Dust VS M Sand – Are You Using right sand for your constructions?

Let us first understand the meaning of quarry dust and m-sand individually.

Quarry dust is a by-product of the crushing process which is a concentrated material to use as aggregates for concreting purpose, especially as fine aggregates. In quarrying activities, the rock has been crushed into various sizes; during the process the dust generated is called quarry dust and it is formed as waste.

Manufactured sand (M-Sand) is a substitute of river sand for concrete construction. Manufactured sand is produced from hard granite stone by crushing. Manufactured sand is an alternative for river sand. Due to the fast growing construction industry, the demand for sand has increased tremendously, causing deficiency of suitable river sand in most part of the word.

The contrary between the two can be understood in the following fields:

Appearance and formation :

  • Original M Sand is free from an elongated and flaky particle since it is shaped cubically using VSI shaping machine. The cubically shaped particles give high strength and long life to concrete.
  • Quarry dust is an elongated and flaky particle. It is fractured dust of Jaw Crusher.  A waste product in the production process of stone crusher.

Manufacturing :

  • Original M Sand is manufactured strictly adhering to IS 383 (1970) zone II grading. Perfect grading and cubical shape of M Sand provides 10-15% more compressive strength for concrete and 25-30% more strength for masonry works compared to crusher dust.
  • Quarry dust has no controlled manufacturing process as it is the bi-product of stone crusher. Does not adhere to IS 383 – 1970 or any other standards

Quality and Strength:

  • Original M Sand has minus 150 micron less than 10% and minus 45 micron less than 2% only. This helps the concrete to maintain water absorption rate of concrete less than 2% which helps to produce concrete of consistent quality.
  • Quarry dust has lesser concrete strength and lower durability. Not recommended for use in concrete or masonry works.

Quality of outcome:

  • Original M Sand is graded with precession by removing the microfine correctly and thus it has higher ‘Finess Modules Index’ compared to river sand and crusher dust. This gives good workability for concrete and masonry that help in easy and quick construction.
  • In case of Quarry dust, in order not to compromise the strength of building during construction, the dust comes handy as an equal substitute without threat to quality at the same time rendering good strength to constructions.


  • Quarry dust come at cheaper cost and lesser pressure on market demand for sand. Partial replacement of sand with this dust will make good concrete that is well desired in residential construction. The final product is strong bricks, slabs or tiles that are produced at lower cost compare to using sand.
  • Original M Sand has two grades for concreting and plastering. This saves you the work of filtering the sand. Besides, as there is no loss of sand, you can save money on it.

New Construction Techniques 2019

The tech industry is promoting innovation in construction on an ever greater scale, bringing to the table new solutions designed to enhance productivity, improve the functionality of materials, and offer wider choices to both crew and client. With an eye toward growth, progress, and sustainability, here are five innovations in construction to keep an eye on in 2019.

Construction materials have come a long way over the years. From the use of timber and concrete to cigarette butts and cardboard, builders are looking for newer and more effective materials for their projects. Builders are taking advantage of innovative solutions that will reduce the time and cost of designing new structures.

Green Design and Construction Technology

Also continuing into 2019 is the trend toward green design and technology in construction. Every construction project is expected to increase their participation through green design aiming towards the LEED certification. This trend, which started some years ago, will continue to rise in 2019. The essence of green design and construction is the effort to create resource-efficient and environmentally responsible construction projects. It includes every aspect of construction, including planning and design, demolition, and clean-up.

With 20 percent of global emissions directly attributable to the construction industry, green building practices can go a long way toward supporting, rather than harming, the environment—especially at a time when aging buildings make new construction so critical.

The Brave New World of Robo Builders

In line with timber towers is the invention of robots that assemble complex wooden structures rapidly and with far greater ease than their human counterparts ever could. These machines, which look and function much like the large robotic arms used in vehicle manufacturing, follow programmed algorithms to cut wood and position it for the completion of sophisticated structures. Humans lend a hand in securing the structures with nuts and bolts once everything is in place. However, due to the precision of the manufacturing and assembly, the metal plates and bolts typically required by architects to reinforce beams are not needed here, thereby reducing cost as well.

Building Information Modelling (BIM)

There is one single tool that can increase effectiveness and collaboration like no other tool: BIM (building information modelling). BIM is a technique of creating computer representations of buildings, roads, and utilities. It is used by architects and engineers to predict job costs and show how building materials and structures will hold up over time. It is increasingly required for many RFPs and government agencies, who insist on understanding the issues a project will face before investing. Building owners can also use BIM to develop maintenance schedules.

BIM not only increases collaboration but also reduces construction costs and promotes a safer, faster building process and fewer safety incidents. BIM will soon be a requirement of construction and building codes. If you are not BIM-ready, try to get a sub-contractor that can become your BIM expert.

Modular, Prefabricated Buildings

In 2019, construction with modular, prefabricated building units will gain more followers and fans in the real estate and construction industries. In residential building, modular constructions can offer particular benefits to young telecommuting professionals and millennials who seek new housing outside metro areas, in remote suburbs and rural areas where they can enjoy closer contact with nature.

Modular homes constructed off-site reduce the impact to the landscape and offer a faster way to develop residential areas. Construction of modular components can be underway offsite even while permits are being secured and financing is being finalized. Because components are built in factory environments, weather delays are virtually non-existent. And there is very little waste since scraps and leftover materials are immediately recycled. Modular homes tend to be cheaper and quicker to build, as crews are familiar with assembly methods.

Some modular homes can even be moved from location to location as owners follow employment opportunities or seek new neighbourhood environments.

The Internet of Things (IOT)

As we see a continued rise in adoption of data-driven technology in construction, we will also see innovations in how this technology is utilized to create new efficiencies. Embedded sensors on a connected worksite create huge opportunities for collecting and managing data on safety, material performance, and operational workflow, just to name a few. Smart devices and wearable construction technology, as well as sensors and on-site cameras can be tied in to construction management software and give a much clearer picture of building progress and real-time status reporting.

This integration will affect not only the flow of a project, but also provide vital data that can be examined after handover to become a part of operational management. Sensors that provide information on environmental conditions and structural performance are of particular importance in this area.

Programmable Cement

In an effort to make concrete structures more durable, programmable cement can be used to achieve water and chemical resistance. Programmable cement is essentially a form of cement that can be designed to achieve less porous and more chemically resistant shapes. These innovative shapes limit damage to concrete and increase the durability of structures.

Self-healing Concrete

Cracks in concrete have been a long-standing problem in the construction industry. A small crack often becomes larger and wears away the structure over time. Self-healing concrete can be used to solve this challenge. This innovative building material consists of living spores and water capsules within the mixed concrete. When damage occurs, the capsules crack open and mix with water. This mixture produces calcite, a material that fills the damaged area and later solidifies in place. 

By using self-healing concrete, structures such as tunnels, buildings and bridges will cost less to build and maintain. 

Illuminating Cement

Illuminating cement is a new material that will influence road construction in 2019. This cement traps light from the sun during the daytime and releases it at night. 

Illuminating cement creates a glowing surface that allows builders to save on lighting costs. This material can also be used to light up swimming pools, footpaths and roadways; reducing dependency on street lighting. 

Air-cleaning Bricks

New construction materials are also improving the quality of indoor air. Because air quality is always a top concern for commercial structures, using passive air filtration systems can significantly benefit builders and building owners. 

Air-cleaning bricks are innovative construction materials that can filter incoming air to remove pollutants. These bricks are placed on the outside of a building and they filter heavy air particles as air flows indoors. 

Cigarette Butts

Cigarette butts are another innovative material that can be used in construction. They can be infused into bricks, where they provide durability and efficiency to building materials.

Because cigarette butts result in millions of tons of waste every year, using them as a construction material helps clean up the environment and reduce material costs. The bricks made from cigarette buts are often lighter, more convenient to use, and highly energy efficient.

Mass Timber

Over the years, the use of timber steadily decreased in commercial construction projects. Concrete and steel have been the preferred option due to their strength and fire resistance. However, timber is making a comeback in 2019 in the form of mass timber, which is essentially solid wood that has been laminated and panelised to increase strength and durability.

Using mass timber allows builders to lower the carbon footprint of buildings by trapping carbon from the atmosphere, and to reduce the cost of building materials.

 M Sand in Bangalore – Tavara mines & Minerals

High Quality M Sand Manufactures and M Sand Suppliers in Bangalore

Tagged : /

How manufactured-sand help reduce indiscriminate sand mining and saving ecosystems

River beds

There is an urgent need to protect the environment by protecting the river beds, but the construction industry needs sand. Manufactured sand is the solution to this problem. The manufactured sand industry has potential in the region that boasts of several blue metal quarries. Blue metal is the raw material for manufactured sand. Listing out the environmental degradation caused by exploiting river sand, 18 lakh wells in the southern region turned useless since groundwater level dipped alarmingly as river sand, the natural aquifer, was depleted from rivers.

Water table, which was at 50 ft or so, fell to 600 ft in Madurai. There is no water even for agriculture purposes. The government agencies should start taking up construction activities using manufactured sand in place of river sand. Manufactured sand is superior to river sand since the former has better grip in concrete and free of silt and organic impurities. Many big projects have been carried out with the use of the manufactured sand. Public should be sensitised about using it in place of river sand.

M Sand (Manufacture Sand) and its Advantages

What is manufactured-sand, or artificial, or engineered-sand, as it is described? M-sand is produced by passing boulders and stones through a series of jaw and cone crushers for size reduction and then fed into vertical shaft impact (VSI) crushers where they are pulverized further to the size of sand. The VSIs crush them to cubical and angular particles. In certain markets, this is flogged off as m-sand; it’s a masquerade. This process is incomplete From the VSI stage, the sand has to further go through a process of elaborate washing to remove dust and flaky particles Washing in a hydro cyclone process is apparently critical to the entire sand manufacturing process as it effectively removes excess ultrafine of minus 75 microns from the feed material. Ultrafine can be detrimental to the making of concrete.

Manish Bhartia, MD of CDE Asia, has introduced an array of high-performance crushers and washers in India over the past few years. He says the sand thus washed and dewatered is impurity free and Ready-Mix Concrete (RMC) ready. His manufacturing unit in Kolkata is jointly promoted by CDE Global of the UK and the Bhartia family.

Apparently these machines with washers that also help in dousing dust at production sites are a class apart from the crude equipment used at stone quarries.
That the concept of manufactured-sand is gaining traction can be gauged from the fact that, since 2007, when Bhatia began operations, he has been involved in over 60 crushing projects. One of his anchor clients is the Bhopal-based Dilip Buildcon which operates a cluster of 15 plants across the region.

Bhartia estimates that the collective output of msand across all plants would be merely 10 million tonnes per annum (Mtpa). “Of this barely 25 per cent of manufactured-sand produced comes into the open market,” he says. The rest are consumed in-house by large developers and RMC units. The demand for sand is estimated at 500 Mtpa. The nascent industry is just about scratching the surface.

While m-sand gains traction in the market, the idea of abolishing the stone quarry bit in the system seems quite enticing. This is precisely what IL&FS Environment, a subsidiary of IL&FS, one of India’s leading development and finance companies, is doing.

IL&FS is propagating the use of construction and demolition (C&D) waste for the production of m-sand and other aggregates. It is operating India’s first C&D waste recycling facility in Delhi with a capacity of 2000 TPD.

C&D waste is a huge problem in our metro cities. Delhi alone generates over 5,000 tonnes of C&D waste every day. Where does this waste go? It is surreptitiously dumped along roadsides or in water bodies, and in Mumbai, into stretches of mangroves along the seashore. The recent flooding of Chennai can also be partly attributed to this trend.

In Navi Mumbai, if construction debris is cleared out from all the stretches it is dumped in, the city can recover land worth Rs 6,000 crore.

L&FS Environment claims that its C&D waste management facility has helped save over 25 acres of land valued at Rs 250 crore. Its plant has processed over 20 lakh tonnes of C&D waste since it started operations and has recovered/recycled 95 per cent of the incoming waste. Enthused by the results of the pilot C&D recycling plant, several agencies including the PWD, Delhi Metro and municipal bodies have commissioned IL&FS Environment to setup and operate similar plants.

The only impediment to the adoption of recycled-sand (r-sand) has been the absence of clear government guidelines on the usage of recycled products as in the US or the EU. This has been addressed to an extent now: the Delhi government has issued an advisory to all departments to use a minimum of 10 per cent of recycled C&D waste in construction. It’s about time to craft national guidelines on C&D waste.

While the transition from river–sand to manufactured– sand and recycled–sand is a good augury, there are environmental issues that remain to be addressed. “It is essential to ensure that these new genre plants adhere to strict pollution norms. Communities living near or around these plants are already restive,” says Sumaira Abdulali of the Mumbai-based Awaaz Foundation that has been campaigning against illegal sand mining for years.

A few plants on the outskirts of Pune have already been forced to shut down by agitating farmers.

So, Start using M Sand for Constructions Which has more advantage than River Sand

Tagged :

Granite Stones

Granite is used in buildings, bridges, paving, monuments, and many other exterior projects. Indoors, polished granite slabs and tiles are used in countertops, tile floors, stair treads, and many other design elements. Granite is a prestige material, used in projects to produce impressions of elegance and quality.

With our extensive product range, we have successfully carved a super strong market niche and are serving our valued customers with customized solutions.

In order to meet the diverse needs of our clients, these are available in various patterns & colors. In order to ensure the quality, these are manufactured using premium quality raw material and latest technology. High strength, glossy finish, attractive look, and durability of these slabs are some of the distinct features. Moreover, these are available in the market at very feasible prices.

With our in-depth expertise in the domain, we provide our customers with a superior quality range of Granite Slabs. Our offered granites are highly demanded in the market for their wide use in Flooring, Garden Furniture, paving material, Pillars, Landscaping Products, Arches, Fountains and Stone Arts & Crafts. With the use of latest machines, equipment’s and tools, these are diligently processed by our skilled and experienced team of professionals. These are widely acclaimed by the customers for their features like excellent finish and high durability.


  • Fine finish
  • Dimensional accuracy
  • Easy to clean
  • Durable
  • A1 quality
  • Available in all sizes & thickness(random slabs, cut to size, gang saw, tiles)

These granites are exclusively designed and manufactured by skilled and experienced professionals. Our offered assortments of products are available in different ranges of vibrant colors and alluring patterns. To attain maximum satisfaction of our valued customers, we offer a superior quality range of Granite Products. Further, these are stringently tested on various defined parameters to provide our customers with a qualitative and defect free range of Granite products. We have experienced and qualified professionals in our team, who use the latest machinery and tools for processing these Granite Products as per the defined quality standards. Moreover, we ensure that the complete range is safely delivered. Our experienced quality examiners verify each product in detail prior to the final packaging so as to ensure maximum benefits in favor of the clients

Tavara is M Sand Manufacturers in Bangalore to best the best quality M Sand contact us. Tavara also has Granite Quarrying where two colors of Granite stones are produced.

How to Make Best Concrete Mixture

Well, Everyone knows how the concrete is made. It is done by mixing Cement, Water, Fine Aggregates (Sand), and Coarse Aggregates (Jelly). But we all must know what is the best mixing ratio to get the best quality concrete.

What is Ratio of mixing M Sand for Concrete? There is no difference of mixing M Sand and River Sand (RV). The ratio is same for M Sand as you mixing river sand but thing is you should use a Good M Sand.

But best Mixture ratio depends on conditions and situation where you are using the concrete mixture. If you are using mixture in a water flow area than your mixture should with stand more corrosion.

concrete mixture ratio

The Best Mixture for M30 is C: W: FA: CA = 1:05:1.89:3.04. C = Cement, W = Water, FA = Fine Aggregate, CA = Coarse Aggregate.

This is only a standard Mixture you should mix the concrete depending up on your situation and condition for the best result.

You can check the standard mixture result below link

  1. Concrete Mixture
  2. Block work
  3. Plastering work

For any mixture related query’s leave a comment below.